Product: "Grout Restoration"

(a case = 12 qts.)
|
![]() |
---|
What "Grout Restoration" does:
. Restore the original grout color.
. Aggressively removes stains.
. Removes rust stains and mineral deposits.
. Allows for adjusting the strength for even the worst stains.
. Used by DIY and professional installers.
You want to use "Grout Restoration" if:
. Your grout is dirty and dull.
. The grout has lightened or darkened from the original color.
. You have rust stains or heavy mineral deposits.
. You, quite smartly, want to dilute down to start with the least aggressive formula, but want to increase the strength as needed.
Why would you want to use "Grout Restoration"?:
Back Label:
Application Instructions, Coverage, Health & First Aid, Emergency Contact, and more:
Application Instructions, Coverage, Health & First Aid, Emergency Contact, and more:

Discussions
How does "Grout Restoration" work?
If necessary, it can be used stronger to remove the top layer of the grout itself to reveal the unstained grout below. This technique may cause some color or texture change - so test first.
Caution: white and color pigmented grouts are more sensitive to color change then natural gray grout when using a cleaner this strong. You might want to try "Insta-Clean" first. "Insta-Clean" breaks down oil, grease, food, etc. stains quite well without effect to grout or materials.
"Grout Restoration: is for the restoration of severely stained grout where the grout has actually undergone a permanent color changing permanent stain.
Not just for tile and grout. Use on glass block, glass shower doors, even windows with heavy mineral deposits.
For marble and limestone - using too strong could dull the surface. However, there is no other practical way to remove hard water deposits. Therefore, fully dilute per label instructions and test a small area first.
Concerned about Doing It Yourself or what your contractor says?
Our goal for our contractor customers - NO CALL BACKS. A good contractor will understand the logic of Aldon application instructions on the labels and will not take shortcuts. If a contractor does not agree, feel free to let us find out what is so unusual about this particular project so the contractor does not have to return.
Frequently Asked Questions -

It is not a problem with the product! (They all do what we say they do!)
It is very important that you understand this concept so you do not waste time and effort in the wrong direction. Instead, think about what might be different about the job conditions that you were told or believe. We will assist in identifying what that might be and save you considerable time.
. Your conditions may have been misdiagnosed! (It can happen, even with all the information we provide.) Contact Us with the details and we will assist.
. The surface conditions (absorption rate, contaminants, temperatures, etc.) are other than thought.
. And/or - it was not applied per label instructions! (The instructions are designed to overcome the above, and overcome job conditions of which you might not be aware.)
Health & Safety:
Some people are allergic or sensitive to some chemicals, especially petroleum solvents. In that case, evaluate our water based products. With the solvent type products, immediately as applied use proper cross ventilation fans blowing across the floor and out the doors and windows. Do not use any chemical products from any manufacturer in a house with the sick, elderly, pets, babies, or other concerns.
Aldon Corporation and protected under applicable USA and international intellectual property law.