Home     Surface Types

  Free Consultation

Product List - Order


Product: "Grout Residue Remover"

Gallons

Cases
(a case = 4 gallons)
Sample
Grout Release


What "Grout Residue Remover" does:

. The grouting process leaves a cement residue paste on the surfacing face that requires many "washes" of water and a sponge to remove. Usually a light film isn't noticed right away. Or until you wonder why the surface color is not as vibrant as before it was installed.
. For many years, muriatic acid was the cleaner used for this problem. Muriatic acid is effective, cheap, and risky to people, pets, and metal fixtures.
. "Grout Residue Remover" works as fast as muriatic acid and is far faster than another commonly used cleaner - sulfamic acid.
. "Grout Residue Remover" saves time and money for any size project.
. Used by DIY and professional installers.
Video: See "Grout Residue Remover" at work!

Why would you want to use "Grout Residue Remover"?:

You want to use "Grout Residue Remover" if:

. If unfortunately, you did not use Aldon "Grout Easy".

. You found that grout residue is trapped in the face texture.

. You know that muriatic Acid can penetrate down into the surfacing and dry out. The dry crystals over years of contact with the moisture in the air will slowly release undetectable vapor. In a house, this vapor will over time create rust on metal household fixtures. And that can cost the loss of thousands of dollars worth of fixtures. "Grout Residue Remover" is buffered to eliminate this risk.

. You know that you do not want to have muriatic acid eat away the top layer of cement paste that results in burning of the grout, bleaching of color, and the reveal of sand particles that makes the grout blotchy and rough.

Do you want to start the installation with "Grout Easy" and eliminate the need for "Grout Residue Remover? Review: "Grout Easy"

Gallons

Back Label:
Application Instructions, Coverage, Health & First Aid, Emergency Contact, and more:
On your phone? Turn sideways for easier viewing.
NO LABEL?  TRY RELOAD.

Discussions

Do not "pre-seal" - apply a sealer before grouting.
Do not use any sealer as a grout release barrier (pre-sealing). This technique creates many risk factors to be avoided. Prevent grout smears, surface scratching and keep grout residue out of surface texture by coating with Aldon Grout Easy before grouting. Grout Easy is a water soluble coating that comes off easily while grout is being cleaned off in the normal process with water and a sponge.

Concerned about Doing It Yourself or what your contractor says?
If you are concerned about doing it yourself - consider that the satisfaction of a project is directly related to YOUR knowledge of what needs to be done and how. Who actually does the work is less important. We estimate that 50% of the usage of Aldon products is by "do it yourself" homeowners and we know they are happy because we hear from them.

Our goal for our contractor customers - NO CALL BACKS. A good contractor will understand the logic of Aldon application instructions on the labels and will not take shortcuts. If a contractor does not agree, feel free to let us find out what is so unusual about this particular project so the contractor does not have to return.

Frequently Asked Questions - clean, protect, seal tile - stone - pavers - brick
If you do not see the results you expect:

It is not a problem with the product! (They all do what we say they do!)
It is very important that you understand this concept so you do not waste time and effort in the wrong direction. Instead, think about what might be different about the job conditions that you were told or believe. We will assist in identifying what that might be and save you considerable time.
. Your conditions may have been misdiagnosed! (It can happen, even with all the information we provide.) Contact Us with the details and we will assist.
. The surface conditions (absorption rate, contaminants, temperatures, etc.) are other than thought.
. And/or - it was not applied per label instructions! (The instructions are designed to overcome the above, and overcome job conditions of which you might not be aware.)

Click here for FAQ's and : clean, protect, seal tile - stone - pavers - brick for this product.

Health & Safety:
When you read all the health and safety warnings on a label, you will see we have done our best to make you think about working with any chemicals from any manufacturer. Even household cleaners purchased in supermarkets (many with more hazardous ingredients than we use because they are less expensive for the manufacturer) should be used with common sense and awareness. People have been injured by not knowing you can create poisonous gases by mixing chlorine bleach with some cleaning products. One of the many criteria involved in Aldon products is that all our products will be used with any other of our products and no normal combination of usage events should be hazardous. Nevertheless, use common sense and don't be in a hurry. Let each step prove itself satisfactorily before proceeding to the next.

Some people are allergic or sensitive to some chemicals, especially petroleum solvents. In that case, evaluate our water based products. With the solvent type products, immediately as applied use proper cross ventilation fans blowing across the floor and out the doors and windows. Do not use any chemical products from any manufacturer in a house with the sick, elderly, pets, babies, or other concerns.


© Aldon Corporation All Content, Design, Copy, Code, and Graphics copyright 1995-2017 by
Aldon Corporation and protected under applicable USA and international intellectual property law.