This translation service is provided by another company, not by Aldon Corporation. Aldon Corporation is not responsible or liable for translation errors. .

CAUTION: Please read this before reading the label:

We are concerned about the quality of this translation because it is done by computer software. Please understand that some things might sound foolish, insulting, or possibly not make sense. This is because Aldon has no ability to insure the accuracy or appropriateness of the translation. Therefore, we offer this translation for any value that it might give you, but please excuse the errors that might be contained herein. Please see the English language label on the Aldon web page and ask someone to translate it for you in case of any miscommunication. Aldon Corporation takes no responsibility or liability for any miscommunications.

To print this page - type "Control Key" and "P"

ALDON CRYSTAL GLAZE SEALER CGG 0700

Verify sealer choice with the Aldon “Sealer Selector”. This sealer for absorbent flooring materials:

Creates no color change on most materials

Is high gloss and self levels to a smooth finish

Can be used on dry or slightly damp materials so long as surface is dry.

Will not wear from foot traffic if coated with Aldon “Lifeguard”.

Average coverage is 350 – 600 sq. ft/gal depending on material absorption rate.

Note: This "coating" sealer will bond to a weak or strong surface, therefore, any colorants or other surface treatments must be tightly bonded to the tile body or the sealer could peel because it is attached to the unbonded surface treatment, not the tile body.

For additional information and assistance with your particular flooring material and the subjects indicated by underlined text, see the sales counter and/or visit the Aldon web site at www.aldonchem.com.

SURFACE PREPARATION: Do Not Preseal (sealing prior to grouting). Instead, use Aldon "Grout Easy" grout release. Surface must be between 55-80 º F., CLEAN, and free of all substances that may cause a reaction or impair adhesion . Prior to sealing-test for 3 second absorption of water drops to confirm nothing exists to interfere with proper adhesion. Do not use over, or under, any other sealer. If previously sealed - first see Problem Solving: Redoing A Previously Sealed Surface"

APPLICATION TECHNIQUE ( Easy - Pour & Spread The Puddle ): PATCH TEST THE SEALER FIRST to insure satisfaction with your application techniques and the final appearance. Maintain adequate cross ventilation until fully cured. Wear gloves, and all else necessary for protection of breathing, eyes, and skin. Do not dilute! Clean equipment with clean water.

No sponge or sprayer. POUR directly from bottle to floor to make a small puddle (NO INTERMEDIATE CONTAINER i.e. paint tray, pail). Suggested tool is a pad or short nap paint roller made to not rotate, thereby creating a large, soft squeegee that conforms to the surface.

Simply help the puddle to spread to a thick, even coating. Do not paint out the edges to a thin coating. Allow to flow and self-level.

Judge effectiveness of sealer application, not by floor gloss, but by water drops not being absorbed.

A second application will require less sealer. Let first dry before applying a second.

For average applications (varies with humidity) : dry to touch in 1 hour, dry to walk on in 4 hours, dry hard in 24 hours, cured in 3 days.

As with all water based coating sealers, this sealer may become hazy and slightly less hard if under water for long periods of time, but will return to its original state after water is gone.

ROUTINE MAINTENANCE: Add gloss and additional stain protection by applying "Lifeguard". Thereafter, just use “Maintain” and “Dust Whiz”.

FIRST AID:

SWALLOWED-Do not induce vomiting. Call a physician or Poison Control Center. INHALED: If odor is strong or you notice dizziness, headache or eyewatering-STOP-leave area immediately. EYE/MUCOUS MEMBRANE CONTACT OR SKIN IRRITATION: Flush with water for at least 15 minutes. IN ALL CASES - Immediately Contact a physician & Poison Control Center! Emergeny 800-535-5053 or 352-323-3500 CAUTION: Avoid if allergic. Harmful or fatal if swallowed. Avoid prolonged contact with skin. Use only in a well ventilated area. Keep away from heat or open flame as could produce toxic gases. Do not transfer contents to other unlabeled containers. Close container after use. This product contains no reported carcinogens or suspected carcinogens. We believe that there is no significant risk in the normal use of the product. We believe that there is no significant risk in the normal use of the product. Do not allow to freeze! NOTE: Patch testing is always advisable to insure the results will be as expected. Each application has a different set of variables and because of possible miscommunication or misunderstanding of the conditions, final approval, prior to use, must be the responsibility of the user, regardless of recommendations by the manufacturer or seller. The information contained herein is to the best of our knowledge and belief accurate, however, due to the fact ALDON has no control over proper surface preparation or application methods, no guarantee as to results is offered, expressed or implied. ALDON products are inspected before shipment and conform to ALDON'S usual standards of quality for such goods at the time of shipment to ALDON'S purchaser. All other warranties whether expressed or implied, including any warranties of merchantability and fitness for purpose, but without limitation thereto, are expressly excluded. ALDON shall not be liable for consequential or special damages, nor for any damages in excess of purchase. ALDON CORP.- Reno, NV. 89504 TM: Trademarks of Aldon Corporation © 1999, Aldon Corporation